Brand：GLEASON ? Type：P 1200 ? Category：Gear Hobbing Machine
 |
 |
 |
 |
 |
Technical Parameter
| Make | GLEASON PFAUTER |
| Year of manufacture | 2008 |
| Control name | Siemens 840 D PowerLine |
| Technical Details | |
| max. wheel diameter | 1200 mm |
| gear width | 1000 mm |
| max. module | 25/36 Modul |
| min. module | 1 |
| table diameter | 1200 mm |
| table load | 15 t |
| weight of the machine ca. | 24 t |
| dimensions of the machine ca. | 6,5 x 4 x 3,75 m |
| Nominal workpiece diameter | 1.200 mm |
| Gear hobbing approx | 25 mm |
| Tooth moulding approx | 35 mm |
| Smallest/largest distance between milling cutter and workpiece axis | 100/750 mm |
| ?Largest axial slide path | 1.000 mm (special design) |
| ?Largest clampable hob cutter | |
| Diameter | ? 450 mm |
| Length | 500 mm |
| Swivelling range of the milling head | + 30/ 45o |
| Cutter arbour taper | HSKB160? (hollow shank taper according to DIN 69063) |
| ?Largest milling cutter movement | 450 mm |
| ?Table diameter | 1.200 mm |
| ?Table bore | ?300 mm |
| Depth | 875 mm |
| Maximum table load approx | 15.000 kg |
| Workpiece | |
| Module max | 25 mm (in steel, 600N/mm2) |
| Module profile milling max | 35 mm |
| ? max | 1.200 mm |
| Roll milling cutter | |
| Head circle ? max | ?450 mm |
| length max | 500 mm |
| carriage travel: | X/Y/Z? 800 /450 / 1.000 mm |
| Milling head swivelling angle +A/A | 30/15 degrees |
| Hydraulic unit, Parker | |
| ?Indusa filter? type | DL 2500N Jet |
| Year of manufacture | 2015 |
| max. air capacity | 2.500 m3/hour |
| Accessories | |
| ?Basic machine P 1200, Siemens 840D PowerLine (XP) | |
| Motorised milling head M3 | |
| Extended software for fault diagnosis | |
| Main stand? raised | 1000 mm |
| Power clamping device | |
| ?2 x fume separator make “3nine” type EMMA | |
| Chip scraper conveyor | |
| Set of adjustable wedges | |
| ?Dialogue program “Milling in singlepart process” | |
| ?Magnetic roller | |
| ?Special chip separator | |
| ?Counterholder sleeve | |
| ?Holder for oscillating pressure bell | |
| ?Signal light (3coloured) | |
| ?Telephone diagnosis system | |
| ?Swivelling counter bearing holder | |
| ?Monitoring devices | |
| ?Warmup programme | |
| ?Network connection (Ethernet) | |
| ?Dialogue program “Saving shifting data” | |
| ?Dialogue program “Saving damaged areas” | |
| ?19″ flat control panel OP 015A | |
| ?Rinsing gun | |
| ?Special software for free movement of counterholder | |
| ?Measuring device for P1200 | |
| ?Intermediate plate 300 mm for raising the counter support position | |
| ?Milling arbor 40 mm diameter changed to milling arbor 60 mm | |
| ?BDE/MDE interface in the machine control cabinet | |
| ?Oil separation systems 3nine System EMMA |
Copyright ?2008-2023 Xi'an Eurasia Machinery Equipment Co.,Ltd All Rights Reserved
網站備案號：陜ICP備20002798號-1
Copyright ?2008-2023 Xi'an Eurasia Machinery Equipment Co.,Ltd All Rights Reserved
網站備案號：
陜ICP備20002798號-1
